Warming and covering of slopes of a penthouse

Warming and covering of slopes of a penthouseEach ramp of the attic room must be extremely heated before sheathing. And it is extremely worthwhile to treat the area near the windows. It is through this territory that heat penetrates. In the lower edge of the truss system, in the area of ​​the longitudinal frame, a system of rails measuring 5 x 5 cm is nailed. Mineral material is laid into it, after which the level of insulation thickness reaches the required mark of 20 cm. or a pair of copper wires. All work is extremely easy to do.

Renovation of country housesOrdering online is also easy. Before installing the vapor barrier material, which is designed to eliminate the penetration of water vapor from the rooms into the insulating layers, the sheathing of steel profiles or wood slats is fixed under the plates of dry plaster products.

To improve the thermal insulation quality of the roof, it is possible to put another layer of mineral material in the lath system of this lathing and already put vapor barrier layers on top of it.The vapor barrier material is fixed to the wooden frame thanks to a stapler, and to the metal structure thanks to a double-sided tape.

The film is stacked with a 10-centimeter overlap, while it is extremely not stretched, as under the influence of temperature differences, it can be lengthened. At the joints of the canvas stick tape - the best is one that can stretch and shrink. This will eliminate wrinkling as well as peeling the material in specific areas.

Related news

Warming and covering of slopes of a penthouse image, picture, imagery


Warming and covering of slopes of a penthouse 2


Warming and covering of slopes of a penthouse 22


Warming and covering of slopes of a penthouse 93


Warming and covering of slopes of a penthouse 41


Warming and covering of slopes of a penthouse 49