Rubbing parquet floor with mastic
Before scrubbing, the parquet floor must be swept up, the generated dirt removed, wiped with a slightly damp cloth. The cycle should be led along the plank, in the direction of the wood fibers, and not vice versa, so as not to get a teaser. Scraping parquet flooring can only be cleaned, but not leveled cavities and sags. To level the parquet floor, some places loop over several times, so it will be easier to simply touch such a floor.
After scraping, the parquet, which is made of solid wood, for example, oak or beech, will be brilliant, and rubbed with a mastic or covered with a special varnish will have a good gloss. Mastic and varnish can be purchased at the building supermarket, where you can also buywell rings, a variety of paint and tools.
Rubbing with mastic and varnishing can protect the floors from rapid pollution, give them a beautiful shine, highlight the texture of wood. Caring for such a floor is the easiest and less time consuming than for the unfinished floor.
For rubbing parquet using a variety of mastic. They can be pre-diluted with water, then applied to the floor with a thin layer and rubbed manually or with a special polisher. Each mastic that the industry produces is accompanied by instructions, in accordance with which the mastic must be prepared and used.
Some professionals recommend rubbing oak parquet with water mastic and rubbing beech parquet with anhydrous mastic. Water mastic diluted in thick-walled dishes with hot water. Apply a thin layer of mastic to the floor with a brush.