How to insulate the VAZ?
One of the main and acute problems of the VAZ carin the winter period of time is cold. The time that is spent on warming up the car and the cabin is really huge. But many still do not like the amount of fuel that is spent on this procedure. That's why any motorist has a question, how to insulate the VAZ 2110, is on the first place. Moreover, the procedure itself is quite simple, only it is necessary to find a time for this, which will pay off with the rapid heating of the car in winter. To insulate the car you should get the following: heat insulation and glue "Hermetic".
We heat the salon
First of all, you should insulate the interior of yourVase. To do this, remove the seats and the gearshift knob, and then unscrew the covers on the posts and thresholds. Now you can begin to twist the material that lies on the floor of the car (carpet, linoleum or other). Typically, such materials are not a good heat holder, so you may need to replace them. After that, you can start laying the insulation on the floor of the VAZ. But first you need to cut the insulation in shape. It is necessary to try to lay the insulation on the largest possible area. In addition, you can lay and noise insulation, and only after that put the carpet.
We warm the body and doors
First you need to remove the torpedo, after which youyou will see not the warmed part of the body, which is just metal. It is necessary to apply a sealant on the body and glue the insulation to it. After warming this part of the car, you can put the torpedo back and proceed with the insulation of the doors. To do this, remove the door panels, and then using a "sealant" to glue to the door panels heat insulation material. It is also recommended to insulate and the inside of the doors, which is only a metal structure. After the completion of the work, it is necessary to collect the door panels and proceed with the body warming. The first thing you need to remove the bonnet cover and glue it on the thermal insulation material. In addition, it is necessary to place the insulation on the grille, but do not need to glue it.
We warm the battery and trunk
If you think that you have found an exhaustive answer to thethe question of how to insulate the VAZ, it's not quite so that the car was fully insulated, there is still something to do for the battery and trunk. So for the first one you can sew a special heat-insulating cover. If it is available, the battery will cool down more slowly, and the car will be easier to start in the winter. Then open the trunk and apply heat insulation to its interior trim and cover. Also, it will not be superfluous, take care of purchasing gaskets. Now you know how to insulate the VAZ 2107, or any other model, and the cold will bother you less.