How to eliminate the creak of wooden floors
When the wooden floors begin to age and crack, this annoying crest and nerves appear. Very often, this problem appears in multi-storey buildings that were built in the next decade. Mostly in such apartments wooden lags were installed and wooden boards were laid on them. In order to eliminate the creak of wooden floors, you can completely replace it. But for this you need a lot of money and time to work. But there is a more simple and economical option. This remedy will require only a few tools and supplies. This - puncher, screwdriver or drill, sandpaper, hammer, putty and anchor.
To start work, you need to determine the distance between the boards and the concrete base of the floor. To do this, you need to drill a hole with a screwdriver or a drill with a drill on a tree with a diameter of 10 mm. With the help of thick wire you need to measure the distance.
After the distance is measured, you need to purchase an anchor that is the length that was marked plus 5 centimeters. An anchor that is 150 mm long is fine. Diameter, such an anchor 10mm.So the drill for the perforator needs exactly 10mm. After that, in the drilled hole, where the floors creak, you need to insert a punch with a drill and drill another hole in the concrete base in order for the anchor to engage with the concrete surface and the board.
After the hole is ready, an anchor is inserted into it and hammered into it. The anchor must be sunk into the board, as the protruding cap may damage the floor covering. When the anchor is in place, it is twisted with a screwdriver. The anchor grapples with the concrete base and presses the wooden plank so that it will no longer creak. There will be practically no difference between the boards. Thus, you need to insert the anchor in all places where the floors creak.
And if you need scraping parquet, after you repair your flooring, you can visit the site ip-zyjkova.ru. On this site you can order any repair of your favorite parquet.