Choice of pipes for a warm water floor
Undoubtedly, pipes for warm water floors - the most important process of preparation for the device of a water floor. It depends on what will be the life of the floor heating, the quality and efficiency of heating the entire room. No need to try to save when buying this important material, its characteristics and parameters determine the quality of the entire work, the end result of a multitude of efforts.
This link is the main source of information for this article.
For each situation, specific pipes are used, taking into account size and thickness. For example, for heating garden paths, they will not fit with a small diameter.
The most common are pipes of four materials:
- corrugated stainless steel pipes;
- from metalplastic;
- from the sewed polyethylene (PEX - pipes).
They were widely used several decades ago, in the Soviet past, have recently lost their popularity due to the fact that they quickly corrode, which in a short time will require a complete replacement of heating, they are less convenient to install.In addition, more modern, practical options have appeared on the market. But copper is an excellent conductor of heat, therefore, occasionally copper pipes are used for the installation of floor heating.
Corrugated steel pipes
Implemented on the market relatively recently, therefore, have not yet had time to fully show their advantages. They are safer due to their ability to withstand high pressure inside. The special structure is quite convenient in laying a warm water floor, so the masters prefer to work just them. They give excellent quality heated floor, it does not require effort and do not present difficulties in installation.
But there are some drawbacks. The first and most significant is the considerable cost, as the stainless steel is not cheap in itself, you need quite a lot of such pipes for a water-heated floor, which leads to large financial expenses. In addition, there are heat losses during heating, which are higher than those of polyethylene and metal-plastic pipes, since steel has a higher thermal conductivity and heat transfer.
Now they are most common for laying water floor, as they are distinguished by many advantages compared to others.Laying does not require large cash costs, moreover, they provide excellent heat conductivity. Another positive factor is the reasonable cost combined with optimum quality. Most of the warm floors are made using plastic pipes. But it is worth remembering that they do not tolerate high water pressure, burst - the consequences are unpleasant and troublesome - you need to disassemble the entire floor and carry out a complete repair.
Cross-linked polyethylene pipes
In fact, they do not find the place of the seam, it is just reinforced polyethylene, which makes the pipes very durable. These pipes are a good example of how the chemical industry makes construction and repairs more efficient and successful. They are not so long ago represented on the building materials market, but they have already firmly gained the trust of craftsmen and specialists - they don’t leak, are resistant to pressure surges that metal plastic pipes cannot tolerate, tolerate high temperatures, wear out less, and therefore, the life of these pipes is much lower. longer than the rest. In addition, specialists in laying warm water floors note optimum heat conductivity, which ensures high heating efficiency.The flexibility and elasticity of the pipes makes the installation of the floor easier and faster.
As you can see, there are different requirements for heated floors, so you can choose the pipes that best suit the capabilities of the client and the specific situation. Modern industry is constantly improving their quality, which makes it possible to make the floor not only warm, but also durable.